QUANTUM SUPERTREND AI INSTALLATION AND USER GUIDE FOR MT4 AND MT5 MQL MARKET BUYERS ИНСТРУКЦИЯ ПО УСТАНОВКЕ И ИСПОЛЬЗОВАНИЮ ДЛЯ ПОКУПАТЕЛЕЙ MQL MARKET ====================================================================== ENGLISH ====================================================================== 1. ABOUT THE PRODUCT Quantum SuperTrend AI is an indicator for MetaTrader 4 and MetaTrader 5. It combines: - SuperTrend bullish and bearish lines; - BUY and SELL signals; - an ATR-based Take Profit level; - optional ADX, RSI, and AI Score entry filters; - optional AI Exit signals; - exit markers; - a historical statistics table; - an entry-filter information panel; - popup, push, email, sound, and log notifications; - a movable dashboard with the current signal state. This is an indicator, not an Expert Advisor. It does not open, modify, or close orders. All trading decisions and order placement remain the user's responsibility. AutoTrading/Algo Trading is not required for the indicator. The MT4 and MT5 editions are installed separately. Use the edition purchased for your trading platform. 2. INSTALLATION FROM MQL MARKET Use the same MQL5.com account that was used to purchase the product. The MQL5.com account is different from your broker trading account. MetaTrader 4 1) Start the desktop version of MetaTrader 4. 2) Open Tools -> Options -> Community. 3) Sign in to the MQL5.com account used for the purchase. 4) Open the Terminal window with Ctrl+T. 5) Open Market -> Purchased. 6) Find the MT4 edition of Quantum SuperTrend AI and click Install. 7) After installation, open Navigator with Ctrl+N and find the indicator under Indicators -> Market. MetaTrader 5 1) Start the desktop version of MetaTrader 5. 2) Open Tools -> Options -> Community. 3) Sign in to the MQL5.com account used for the purchase. 4) Open Navigator with Ctrl+N. 5) Open Market -> My Purchases. In some terminal builds, use Toolbox -> Market -> Purchased. 6) Find the MT5 edition of Quantum SuperTrend AI and click Install. 7) After installation, find the indicator under Indicators -> Market. If the product is not visible, verify the MQL5.com account, refresh Navigator, or restart the terminal. Do not copy or compile Market files manually. Install the product through the Purchased/My Purchases section. Market products cannot be installed in the web terminal or mobile application. The desktop terminal or a compatible VPS is required. The mobile application can be used to receive push notifications. Installing on another computer, reinstalling the operating system, or making a major hardware change may use another Market activation. Available activations are shown on the product page. To update the indicator, open Purchased/My Purchases and click Update when a new version is available. 3. ADDING THE INDICATOR TO A CHART 1) Open the required symbol and timeframe. 2) In Navigator, open Indicators -> Market. 3) Drag Quantum SuperTrend AI onto the chart or double-click its name. 4) Configure the Inputs parameters. 5) Click OK. The SuperTrend lines, signal markers, panels, and dashboard will appear after the required price history has loaded. For an initial check, use the default settings on a demo account. Attach only one indicator instance to each symbol/timeframe combination to avoid duplicate notifications. 4. QUICK START 1) Select the symbol and timeframe you want to analyze. 2) Keep InpAlertOnClosedCandleOnly = true. 3) Keep InpSendSignalOnAttach = false. 4) Start with the default SuperTrend settings: InpATRPeriod = 10 InpSTMultiplier = 4.0 5) Leave the ADX, RSI, and AI entry filters disabled for the first check. 6) Wait for a completed candle and review the next confirmed signal. 7) If fewer, more selective signals are required, enable the filters one at a time and test the result on the intended symbol and timeframe. The default settings are a technical starting point, not a promise of profitability. 5. SIGNALS AND CHART ELEMENTS SuperTrend lines - Green line: bullish SuperTrend state. - Red line: bearish SuperTrend state. Entry signals - Green BUY arrow: SuperTrend changed from bearish to bullish and all enabled entry filters passed. - Red SELL arrow: SuperTrend changed from bullish to bearish and all enabled entry filters passed. Filtered signals - Dark green marker: a raw BUY reversal was rejected by an enabled filter. - Maroon marker: a raw SELL reversal was rejected by an enabled filter. Set InpShowFilteredSignals = false to hide rejected-signal markers. Take Profit and exit markers - Dotted blue line: ATR Take Profit level. - Aqua marker: ATR Take Profit exit. - Gold marker: exit after an opposite SuperTrend signal. - Violet marker: AI Exit. The displayed Entry, Take Profit, and SuperTrend reverse level are reference values only. The indicator does not place Stop Loss or Take Profit orders with the broker. 6. ENTRY FILTERS ADX filter - InpUseADXFilter enables or disables the filter. - InpADXPeriod sets the ADX period. - InpADXMinValue sets the minimum ADX value required for an entry. With the default threshold of 20, a signal is accepted only when ADX is at least 20. RSI filter - InpUseRSIFilter enables or disables the filter. - InpRSIPeriod sets the RSI period. - InpRSIBuyMin is the minimum RSI value for BUY entries. - InpRSISellMax is the maximum RSI value for SELL entries. With the default values, BUY requires RSI >= 50 and SELL requires RSI <= 50. AI Score filter - InpUseAIFilter enables or disables the local score filter. - InpAIMinScore sets the minimum accepted entry score from 0 to 100. - InpAIADXWeight controls the ADX contribution. - InpAIRSIWeight controls the RSI contribution. - InpAISTSlopeWeight controls the SuperTrend slope contribution. - InpAICandleWeight controls the candle impulse contribution relative to ATR. AI Score is calculated locally from these four components. It does not require an external service or internet-based model. The filter panel shows the most recent raw SuperTrend signal, ADX, RSI, AI Score, and the final PASS/FAIL result. Use InpShowFilterPanel to show or hide the panel. 7. TAKE PROFIT AND EXIT LOGIC ATR Take Profit - InpShowATRTakeProfit shows or hides the level. - InpATRTakeProfitMultiplier sets the ATR distance from the entry price. - A value of 0 disables the ATR Take Profit calculation. - InpExtendLevelsToNextSignal extends the level until an exit or a new signal. For BUY: Take Profit = Entry Price + ATR x Multiplier For SELL: Take Profit = Entry Price - ATR x Multiplier Entry price - InpUseCloseAsEntryPrice = true uses the signal candle's closing price. - false uses the next candle's opening price as an approximation. AI Exit - InpUseAIExit enables the score-based exit. - InpAIExitBelowScore sets the score below which an exit is generated. - InpAIExitMinBars sets the minimum number of bars after entry before the exit can occur. Enable InpUseAIFilter when using AI Exit so the AI Score is calculated. Exit priority when several conditions occur on the same candle: 1) ATR Take Profit 2) AI Exit 3) opposite SuperTrend signal 4) new filtered entry signal 8. STATISTICS TABLE InpShowStatsTable displays a simplified historical statistics table containing: - WR: win rate; - Total trades; - Winning trades; - Losing trades. The calculation uses filtered SuperTrend reversal signals as entries. An ATR Take Profit exit is classified as a win. An AI Exit or an opposite SuperTrend exit is classified as a loss. An unfinished signal state is not included. This table is not an account statement or a complete backtest. It does not include spread, commission, slippage, swaps, order execution, or monetary profit and loss. Use it only for a preliminary comparison of settings. The table position, corner, font size, text color, background color, and border color are controlled by the InpStats parameters. 9. DASHBOARD Set InpShowDashboard = true to display the dashboard. It shows: - notification status; - current internal BUY/SELL signal state; - symbol; - timeframe; - reference entry price; - current SuperTrend reverse level; - ATR Take Profit level; - entry time; - elapsed time since the signal. The Position row represents the indicator's internal signal state, not an open position in the trading account. Click ALERTS ON/OFF to enable or mute notifications for the current indicator instance. When the indicator is reloaded, the initial state is taken from InpNotificationsDefaultOn. Move the dashboard by dragging its header. Do not drag the alert button. The InpDashboard parameters control its corner, initial position, width, font, and colors. InpPanelUseCurrentBarStop = true shows the current bar's SuperTrend reverse level. Set it to false to use the last closed candle. 10. NOTIFICATIONS Available events - InpNotifyBuyOpen: BUY entry signal. - InpNotifySellOpen: SELL entry signal. - InpNotifyCloseATRTP: ATR Take Profit exit. - InpNotifyCloseSTReverse: opposite SuperTrend exit. - InpNotifyCloseAIExit: AI Exit. Available channels - InpUsePopupAlert: terminal popup. - InpUsePushNotification: mobile push notification. - InpUseEmail: email. - InpUseSound: sound file. - InpPrintToLog: message in the Experts log. Closed-candle alerts are recommended: - InpAlertOnClosedCandleOnly = true sends alerts after candle confirmation. - InpSendSignalOnAttach = false prevents an immediate message when the indicator is attached. Push notification setup 1) Install the MetaTrader mobile application. 2) In the mobile application, open Settings -> Messages and copy the MetaQuotes ID. 3) In desktop MetaTrader, open Tools -> Options -> Notifications. 4) Enable push notifications and enter the MetaQuotes ID. 5) Click Test and confirm that the message arrives. 6) Keep InpUsePushNotification = true and ALERTS ON in the dashboard. Email notifications require configuration under Tools -> Options -> Email. Sound notifications use the file specified in InpSoundFile. 11. MAIN INPUT PARAMETERS Calculation and signals - InpATRPeriod = 10: ATR period. - InpSTMultiplier = 4.0: SuperTrend multiplier. - InpCalculationBars = 2000: number of calculated bars; 0 uses all available bars. - InpShowBuySignals / InpShowSellSignals: show entry arrows. - InpArrowOffsetPips = 3: distance between entry arrows and candles. - InpShowExitMarkers: show exit markers. - InpExitMarkerOffsetPips = 6: distance between exit markers and candles. - InpFilteredOffsetPips = 10: distance for rejected-signal markers. Panels - InpShowFilterPanel: show filter details. - InpShowStatsTable: show historical statistics. - InpShowDashboard: show the movable dashboard. - Corner values: 0 = upper left, 1 = upper right, 2 = lower left, 3 = lower right. - X/Y parameters set the panel offsets. - Font, background, border, and signal-color parameters control appearance. State reconstruction - InpStateScanBars = 700: number of historical bars used to restore the indicator's current internal signal state when it is attached. Change one group of settings at a time and compare the result on the same symbol, timeframe, and historical period. 12. CHECKING BEFORE LIVE USE Before using the indicator in live trading, attach it to a demo-account chart and observe several completed signals on the intended symbol and timeframe. If the terminal shows the Test command for the product in Navigator, you can also run it in the Strategy Tester's visual mode. Choose the symbol, timeframe, and test period, then review the signals, levels, exits, and panels. The indicator's statistics table is simplified and should not replace an independent strategy test. 13. TROUBLESHOOTING The product is missing from Market purchases - Sign in under Tools -> Options -> Community using the purchasing MQL5.com account. - Confirm that the correct MT4 or MT5 edition was purchased. - Refresh Navigator or restart the terminal. The indicator does not appear on the chart - Confirm that the chart has an active price feed and enough history. - Check the Experts and Journal tabs for error messages. - Install any available product update. No entry arrows appear - A SuperTrend reversal may not have occurred in the displayed period. - One or more enabled filters may be rejecting the raw signal. - Enable InpShowFilteredSignals and InpShowFilterPanel to see rejected signals and PASS/FAIL results. - Increase InpCalculationBars if more history is required. Push notifications do not arrive - Confirm that the dashboard shows ALERTS ON. - Confirm that InpUsePushNotification is enabled. - Recheck the MetaQuotes ID and use the Test button in terminal settings. - Check the Experts and Journal logs for notification errors. Duplicate notifications arrive - Check whether the indicator is attached more than once to the same symbol/timeframe. - Keep InpSendSignalOnAttach disabled unless an immediate attach message is required. Panels overlap - Drag the dashboard by its header. - Change the Corner and X/Y parameters for the dashboard, statistics table, or filter panel. 14. REMOVING THE INDICATOR Right-click the chart, open Indicators List, select Quantum SuperTrend AI, and click Delete. This removes the running instance from the chart but does not remove the purchase from your MQL5.com account. 15. RISK NOTICE Quantum SuperTrend AI is an analytical tool. Signals, reference levels, filter results, and historical statistics do not guarantee future performance. Trading Forex, CFDs, stocks, futures, cryptocurrencies, and other financial instruments involves risk. Test all settings and use your own risk management. Please leave a review if you found the product useful. If you have any questions or would like bonuses, contact me: astra09999@gmail.com ====================================================================== РУССКИЙ ====================================================================== 1. О ПРОДУКТЕ Quantum SuperTrend AI — индикатор для MetaTrader 4 и MetaTrader 5. Он объединяет: - линии бычьего и медвежьего SuperTrend; - сигналы BUY и SELL; - уровень Take Profit на основе ATR; - дополнительные фильтры входа ADX, RSI и AI Score; - дополнительные сигналы выхода AI Exit; - маркеры выхода; - таблицу исторической статистики; - информационную панель фильтров входа; - всплывающие, push-, email-, звуковые уведомления и запись в журнал; - перемещаемую панель с текущим состоянием сигнала. Это индикатор, а не торговый советник. Он не открывает, не изменяет и не закрывает ордера. Все торговые решения и размещение ордеров выполняет пользователь. Для работы индикатора кнопка AutoTrading/Algo Trading не нужна. Версии для MT4 и MT5 устанавливаются отдельно. Используйте версию, купленную для вашей торговой платформы. 2. УСТАНОВКА ИЗ MQL MARKET Используйте тот же аккаунт MQL5.com, с которого был куплен продукт. Аккаунт MQL5.com и торговый счёт брокера — это разные учётные записи. MetaTrader 4 1) Запустите настольную версию MetaTrader 4. 2) Откройте Сервис -> Настройки -> Сообщество (Tools -> Options -> Community). 3) Войдите в аккаунт MQL5.com, использованный при покупке. 4) Откройте окно Терминал сочетанием Ctrl+T. 5) Откройте Market -> Purchased (Покупки). 6) Найдите версию Quantum SuperTrend AI для MT4 и нажмите Install (Установить). 7) После установки откройте Навигатор сочетанием Ctrl+N и найдите индикатор в разделе Индикаторы -> Market. MetaTrader 5 1) Запустите настольную версию MetaTrader 5. 2) Откройте Сервис -> Настройки -> Сообщество (Tools -> Options -> Community). 3) Войдите в аккаунт MQL5.com, использованный при покупке. 4) Откройте Навигатор сочетанием Ctrl+N. 5) Откройте Market -> My Purchases (Мои покупки). В некоторых сборках терминала используйте Инструменты (Toolbox) -> Market -> Purchased. 6) Найдите версию Quantum SuperTrend AI для MT5 и нажмите Install (Установить). 7) После установки найдите индикатор в разделе Индикаторы -> Market. Если продукт не отображается, проверьте аккаунт MQL5.com, обновите Навигатор или перезапустите терминал. Не копируйте и не компилируйте файлы Market вручную. Устанавливайте продукт через раздел Purchased/My Purchases. Продукты Market нельзя установить в веб-терминал или мобильное приложение. Требуется настольный терминал или совместимый VPS. Мобильное приложение можно использовать для получения push-уведомлений. Установка на другой компьютер, переустановка операционной системы или существенное изменение оборудования могут использовать дополнительную активацию Market. Доступные активации указаны на странице продукта. Для обновления индикатора откройте Purchased/My Purchases и нажмите Update (Обновить), когда новая версия станет доступна. 3. ДОБАВЛЕНИЕ ИНДИКАТОРА НА ГРАФИК 1) Откройте нужный торговый инструмент и таймфрейм. 2) В Навигаторе откройте Индикаторы -> Market. 3) Перетащите Quantum SuperTrend AI на график или дважды нажмите на его название. 4) Настройте входные параметры (Inputs). 5) Нажмите OK. После загрузки необходимой истории на графике появятся линии SuperTrend, маркеры сигналов, информационные блоки и основная панель. Для первой проверки используйте стандартные настройки на демо-счёте. Устанавливайте только один экземпляр индикатора на каждую комбинацию символа и таймфрейма, чтобы не получать повторные уведомления. 4. БЫСТРЫЙ СТАРТ 1) Выберите символ и таймфрейм для анализа. 2) Оставьте InpAlertOnClosedCandleOnly = true. 3) Оставьте InpSendSignalOnAttach = false. 4) Начните со стандартных настроек SuperTrend: InpATRPeriod = 10 InpSTMultiplier = 4.0 5) Для первой проверки оставьте фильтры входа ADX, RSI и AI выключенными. 6) Дождитесь закрытия свечи и проверьте следующий подтверждённый сигнал. 7) Если нужны более редкие и избирательные сигналы, включайте фильтры по одному и проверяйте результат на нужном символе и таймфрейме. Стандартные параметры являются технической отправной точкой, а не гарантией прибыльности. 5. СИГНАЛЫ И ЭЛЕМЕНТЫ ГРАФИКА Линии SuperTrend - Зелёная линия: бычье состояние SuperTrend. - Красная линия: медвежье состояние SuperTrend. Сигналы входа - Зелёная стрелка BUY: SuperTrend сменился с медвежьего на бычий, и все включённые фильтры входа пройдены. - Красная стрелка SELL: SuperTrend сменился с бычьего на медвежий, и все включённые фильтры входа пройдены. Отфильтрованные сигналы - Тёмно-зелёный маркер: исходный разворот BUY отклонён включённым фильтром. - Бордовый маркер: исходный разворот SELL отклонён включённым фильтром. Установите InpShowFilteredSignals = false, чтобы скрыть маркеры отклонённых сигналов. Take Profit и маркеры выхода - Пунктирная голубая линия: уровень ATR Take Profit. - Бирюзовый маркер: выход по ATR Take Profit. - Золотой маркер: выход при противоположном сигнале SuperTrend. - Фиолетовый маркер: AI Exit. Отображаемые значения Entry, Take Profit и уровня разворота SuperTrend являются справочными. Индикатор не выставляет ордера Stop Loss или Take Profit у брокера. 6. ФИЛЬТРЫ ВХОДА Фильтр ADX - InpUseADXFilter включает или выключает фильтр. - InpADXPeriod задаёт период ADX. - InpADXMinValue задаёт минимальное значение ADX для входа. При стандартном пороге 20 сигнал принимается только при ADX не ниже 20. Фильтр RSI - InpUseRSIFilter включает или выключает фильтр. - InpRSIPeriod задаёт период RSI. - InpRSIBuyMin задаёт минимальное значение RSI для входа BUY. - InpRSISellMax задаёт максимальное значение RSI для входа SELL. При стандартных значениях для BUY требуется RSI >= 50, а для SELL — RSI <= 50. Фильтр AI Score - InpUseAIFilter включает или выключает локальный фильтр оценки. - InpAIMinScore задаёт минимальную оценку для входа от 0 до 100. - InpAIADXWeight задаёт вес ADX. - InpAIRSIWeight задаёт вес RSI. - InpAISTSlopeWeight задаёт вес наклона SuperTrend. - InpAICandleWeight задаёт вес импульса свечи относительно ATR. AI Score рассчитывается локально по этим четырём компонентам и не требует внешнего сервиса или интернет-модели. Панель фильтров показывает последний исходный сигнал SuperTrend, значения ADX, RSI и AI Score, а также итоговый результат PASS/FAIL. Параметр InpShowFilterPanel показывает или скрывает эту панель. 7. TAKE PROFIT И ЛОГИКА ВЫХОДА ATR Take Profit - InpShowATRTakeProfit показывает или скрывает уровень. - InpATRTakeProfitMultiplier задаёт расстояние от цены входа в единицах ATR. - Значение 0 отключает расчёт ATR Take Profit. - InpExtendLevelsToNextSignal продлевает уровень до выхода или нового сигнала. Для BUY: Take Profit = цена входа + ATR x множитель Для SELL: Take Profit = цена входа - ATR x множитель Цена входа - InpUseCloseAsEntryPrice = true использует цену закрытия сигнальной свечи. - false использует цену открытия следующей свечи как приближённое значение. AI Exit - InpUseAIExit включает выход по оценке. - InpAIExitBelowScore задаёт уровень, ниже которого формируется выход. - InpAIExitMinBars задаёт минимальное количество свечей после входа до возможного выхода. При использовании AI Exit включите InpUseAIFilter, чтобы рассчитывался AI Score. Приоритет событий, если несколько условий возникли на одной свече: 1) ATR Take Profit 2) AI Exit 3) противоположный сигнал SuperTrend 4) новый отфильтрованный сигнал входа 8. ТАБЛИЦА СТАТИСТИКИ InpShowStatsTable отображает упрощённую историческую статистику: - WR: процент успешных сигналов; - Total trades: общее количество завершённых сигналов; - Winning trades: успешные сигналы; - Losing trades: неуспешные сигналы. В расчёте входами являются отфильтрованные разворотные сигналы SuperTrend. Достижение ATR Take Profit считается выигрышем. Выход по AI Exit или противоположному сигналу SuperTrend считается проигрышем. Незавершённое состояние сигнала в статистику не входит. Эта таблица не является отчётом торгового счёта или полноценным бэктестом. В ней не учитываются спред, комиссия, проскальзывание, свопы, исполнение ордеров и денежный результат. Используйте её только для предварительного сравнения настроек. Положение, угол, размер шрифта, цвет текста, фона и рамки таблицы задаются параметрами InpStats. 9. ОСНОВНАЯ ПАНЕЛЬ Установите InpShowDashboard = true для отображения панели. На ней показаны: - состояние уведомлений; - текущее внутреннее состояние сигнала BUY или SELL; - символ; - таймфрейм; - справочная цена входа; - текущий уровень разворота SuperTrend; - уровень ATR Take Profit; - время входного сигнала; - время с момента сигнала. Строка Position показывает внутреннее состояние сигнала индикатора, а не реальную открытую позицию на торговом счёте. Нажмите ALERTS ON/OFF, чтобы включить или отключить уведомления текущего экземпляра индикатора. После повторной загрузки индикатора начальное состояние берётся из InpNotificationsDefaultOn. Перемещайте панель, удерживая её заголовок. Не перетаскивайте кнопку уведомлений. Параметры InpDashboard задают угол, начальное положение, ширину, шрифт и цвета панели. InpPanelUseCurrentBarStop = true показывает уровень разворота SuperTrend по текущей свече. Установите false для использования последней закрытой свечи. 10. УВЕДОМЛЕНИЯ Доступные события - InpNotifyBuyOpen: сигнал входа BUY. - InpNotifySellOpen: сигнал входа SELL. - InpNotifyCloseATRTP: выход по ATR Take Profit. - InpNotifyCloseSTReverse: выход по противоположному сигналу SuperTrend. - InpNotifyCloseAIExit: выход AI Exit. Доступные каналы - InpUsePopupAlert: всплывающее окно терминала. - InpUsePushNotification: push-уведомление на мобильное устройство. - InpUseEmail: сообщение по электронной почте. - InpUseSound: звуковой файл. - InpPrintToLog: сообщение в журнале Experts. Рекомендуются уведомления после закрытия свечи: - InpAlertOnClosedCandleOnly = true отправляет уведомления после подтверждения свечи. - InpSendSignalOnAttach = false предотвращает немедленное сообщение при установке индикатора на график. Настройка push-уведомлений 1) Установите мобильное приложение MetaTrader. 2) В мобильном приложении откройте Настройки -> Сообщения и скопируйте MetaQuotes ID. 3) В настольном MetaTrader откройте Сервис -> Настройки -> Уведомления (Tools -> Options -> Notifications). 4) Разрешите push-уведомления и введите MetaQuotes ID. 5) Нажмите Test и убедитесь, что сообщение получено. 6) Оставьте InpUsePushNotification = true и включите ALERTS ON на панели. Для email-уведомлений предварительно настройте раздел Сервис -> Настройки -> Почта (Tools -> Options -> Email). Для звуковых уведомлений используется файл, указанный в InpSoundFile. 11. ОСНОВНЫЕ ВХОДНЫЕ ПАРАМЕТРЫ Расчёт и сигналы - InpATRPeriod = 10: период ATR. - InpSTMultiplier = 4.0: множитель SuperTrend. - InpCalculationBars = 2000: количество рассчитываемых свечей; значение 0 использует всю доступную историю. - InpShowBuySignals / InpShowSellSignals: показ стрелок входа. - InpArrowOffsetPips = 3: расстояние между стрелками входа и свечами. - InpShowExitMarkers: показ маркеров выхода. - InpExitMarkerOffsetPips = 6: расстояние между маркерами выхода и свечами. - InpFilteredOffsetPips = 10: расстояние для маркеров отклонённых сигналов. Панели - InpShowFilterPanel: отображение данных фильтров. - InpShowStatsTable: отображение исторической статистики. - InpShowDashboard: отображение перемещаемой основной панели. - Значения Corner: 0 = левый верхний угол, 1 = правый верхний, 2 = левый нижний, 3 = правый нижний. - Параметры X/Y задают отступы панелей. - Параметры шрифта, фона, рамки и цветов сигналов задают внешний вид. Восстановление состояния - InpStateScanBars = 700: количество исторических свечей, используемых для восстановления текущего внутреннего состояния сигнала при установке индикатора. Изменяйте по одной группе параметров и сравнивайте результат на одном символе, таймфрейме и историческом периоде. 12. ПРОВЕРКА ПЕРЕД РЕАЛЬНЫМ ИСПОЛЬЗОВАНИЕМ Перед применением индикатора в реальной торговле установите его на график демо-счёта и проследите за несколькими завершёнными сигналами на нужном символе и таймфрейме. Если в Навигаторе для продукта доступна команда Test (Тестировать), его также можно запустить в визуальном режиме тестера стратегий. Выберите символ, таймфрейм и период, затем проверьте сигналы, уровни, выходы и панели. Упрощённая таблица статистики индикатора не заменяет независимое тестирование стратегии. 13. УСТРАНЕНИЕ ПРОБЛЕМ Продукт отсутствует в покупках Market - Войдите в аккаунт покупателя MQL5.com через Сервис -> Настройки -> Сообщество. - Убедитесь, что куплена нужная версия для MT4 или MT5. - Обновите Навигатор или перезапустите терминал. Индикатор не отображается на графике - Убедитесь, что на график поступают котировки и загружена история. - Проверьте сообщения на вкладках Experts и Journal. - Установите доступное обновление продукта. Нет стрелок входа - На отображаемом участке могло не быть разворота SuperTrend. - Один или несколько включённых фильтров могут отклонять исходный сигнал. - Включите InpShowFilteredSignals и InpShowFilterPanel для просмотра отклонённых сигналов и результатов PASS/FAIL. - Увеличьте InpCalculationBars, если требуется больше истории. Не приходят push-уведомления - Убедитесь, что на панели указано ALERTS ON. - Убедитесь, что InpUsePushNotification включён. - Проверьте MetaQuotes ID и нажмите Test в настройках терминала. - Проверьте ошибки на вкладках Experts и Journal. Приходят повторные уведомления - Проверьте, не установлен ли индикатор несколько раз на одну комбинацию символа и таймфрейма. - Оставьте InpSendSignalOnAttach выключенным, если немедленное сообщение при установке не требуется. Панели перекрывают друг друга - Перетащите основную панель за её заголовок. - Измените Corner и параметры X/Y для основной панели, таблицы статистики или панели фильтров. 14. УДАЛЕНИЕ ИНДИКАТОРА С ГРАФИКА Нажмите правой кнопкой мыши на графике, откройте Список индикаторов, выберите Quantum SuperTrend AI и нажмите Удалить. Это удалит запущенный экземпляр с графика, но не удалит покупку из аккаунта MQL5.com. 15. ПРЕДУПРЕЖДЕНИЕ О РИСКАХ Quantum SuperTrend AI является аналитическим инструментом. Сигналы, справочные уровни, результаты фильтров и историческая статистика не гарантируют будущую доходность. Торговля Forex, CFD, акциями, фьючерсами, криптовалютами и другими финансовыми инструментами связана с риском. Проверяйте все настройки и используйте собственные правила управления риском. Оставьте отзыв, если продукт оказался полезным. Если остались вопросы или хотите бонусов, свяжитесь со мной: astra09999@gmail.com