RSI BOLINGER EMA EXPERT ADVISOR

INPUTS -
 
RSI - TRUE OR FALSE
RSI PERIOD - 14
RSI TIME FRAME- 1M TO 1 DAY
RSI TOP AND BOTTOM LEVELMIRRORED - MEANS IF I SET OVER BOUGHT LEVEL IS 80 AUTOMATICALY LOWER LEVEL SHOULD BE 20 FOR CALCULATIONS AND TRADE TRIGGERS IF I SET AVOVE BAND 90 THE AUTOMATIC LOWER VALUE IS 10
RSI DELAY - 0 MEANS DISABLED . 1 OR 2 MEANS 
FOR EXAMPLE IF VALUE WAS SET TO ONE IF LOWER LEVEL WAS SET TO 75 THE LINE CROSSES THE 75 LEVEL DOWN AND REVERT BACK ABOVE 75 , AND AGAIN CROSS BELOW THE 75 LEVEL WITHOUT CROSSING THE 50 LEVEL AND CLOSE THAT WILL BE THE TRIGGER .

adaptive rsi true or false 
adaptive RSI PERIOD - 14
atr period - for calculation of adaptive rsi 
art tf to calculate rsi
adaptive RSI TIME FRAME- 1M TO 1 DAY
adaptive RSI TOP AND BOTTOM LEVELMIRRORED - MEANS IF I SET OVER BOUGHT LEVEL IS 80 AUTOMATICALY LOWER LEVEL SHOULD BE 20 FOR CALCULATIONS AND TRADE TRIGGERS IF I SET AVOVE BAND 90 THE AUTOMATIC LOWER VALUE IS 10
adaptive RSI DELAY - 0 MEANS DISABLED . 1 OR 2 MEANS 
FOR EXAMPLE IF VALUE WAS SET TO ONE IF LOWER LEVEL WAS SET TO 75 THE LINE CROSSES THE 75 LEVEL DOWN AND REVERT BACK ABOVE 75 , AND AGAIN CROSS BELOW THE 75 LEVELWITHOUT CROSSING THE 50 LEVEL AND CLOSE THAT WILL BE THE TRIGGER .

something like this for adaptive

Creating an Adaptive RSI (Relative Strength Index) indicator with ATR (Average True Range) calculation for MetaTrader 5 (MT5) involves several steps. Here's a basic outline of how you can develop such an indicator using the MQL5 language:

Calculate the RSI: The traditional RSI is calculated based on average gains and losses over a specified period. For an adaptive RSI, you might want to modify the look-back period based on market volatility or other factors.

Incorporate ATR: The ATR is a measure of market volatility. You can use ATR to adjust the RSI period dynamically. For instance, in a more volatile market, you might want to use a shorter RSI period, and in a less volatile market, use a longer period.

Coding the Indicator: Write the code in MQL5, which is similar to C++ in syntax. You'll need to use specific functions and data structures for MT5.
 
input int RSI_Period = 14;      // Default RSI Period
input int ATR_Period = 14;      // ATR Period
double RSI_Adaptive;
double ATR_Value;

//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int OnInit()
  {
   // Indicator buffers, drawing settings, etc.
   // ...
   
   return(INIT_SUCCEEDED);
  }
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
                const int prev_calculated,
                const datetime &time[],
                const double &open[],
                const double &high[],
                const double &low[],
                const double &close[],
                const long &tick_volume[],
                const long &volume[],
                const int &spread[])
  {
   // Calculate ATR
   ATR_Value = iATR(Symbol(), PERIOD_D1, ATR_Period, 0);

   // Adjust RSI period based on ATR
   int adjusted_RSI_Period = CalculateAdjustedPeriod(RSI_Period, ATR_Value);

   // Calculate Adaptive RSI
   RSI_Adaptive = iRSI(Symbol(), PERIOD_D1, adjusted_RSI_Period, PRICE_CLOSE, 0);

   // Rest of the calculation and indicator plotting
   // ...

   return(rates_total);
  }

//+------------------------------------------------------------------+
//| Calculate adjusted RSI period based on ATR                       |
//+------------------------------------------------------------------+
int CalculateAdjustedPeriod(int basePeriod, double atrValue)
  {
   int adjustedPeriod;
   // Logic to adjust the period based on ATR
   // Example: Decrease period in high volatility, increase in low volatility
   // ...

   return adjustedPeriod;
  }

X-------------------------------------------------------X-------------------------------------------------------------X

BOLINGER BAND  true false
BOLINGER BAND PERIOD - 20
BOLINGER BAND TIME FRAME - 1M TO 1 DAY
STANDARD DEVIATION - 2.0
BOLINGER BAND DELAY - 0 MEANS DISABLED . 1 OR 2 MEANS
FOR EXAMPLE IF THE VALUE SET TO 1 THE LOWER BAND BREAKS AND CLOSE AND HAVE A SMALL PULLBACK ABOUVE THE BAND WITH OUT CROSSING THE MIDDLE MOVING AVERAGE LINE AND AGAIN BREAKS THE LOWER BAND AND THAT WILL BE THE TRIGGER

adaptive BOLINGER BAND  true false
adaptive BOLINGER BAND PERIOD - 20
adaptive BOLINGER BAND TIME FRAME - 1M TO 1 DAY
adaptive STANDARD DEVIATION - 2.0
adaptive BOLINGER BAND DELAY - 0 MEANS DISABLED . 1 OR 2 MEANS
FOR EXAMPLE IF THE VALUE SET TO 1 THE LOWER BAND BREAKS AND CLOSE AND HAVE A SMALL PULLBACK ABOUVE THE BAND WITH OUT CROSSING THE MIDDLE MOVING AVERAGE LINE AND AGAIN BREAKS THE LOWER BAND AND THAT WILL BE THE TRIGGER

something like this for bolinger for adaptive 

Creating an Adaptive Bollinger Band indicator using Average True Range (ATR) in MetaTrader 5 (MT5) involves modifying the traditional Bollinger Bands to adapt to market volatility measured by ATR. Bollinger Bands typically consist of a middle band (which is a moving average), and two outer bands (which are standard deviations away from the middle band). In an adaptive approach, the ATR can be used to adjust the standard deviation or the period of the moving average.

Here's a basic outline for creating an Adaptive Bollinger Band with ATR:

Calculate the Moving Average: This is typically a simple moving average (SMA) or an exponential moving average (EMA) over a certain period.

Incorporate ATR: Use the ATR to adjust either the standard deviation multiplier or the moving average period. For example, in more volatile markets (higher ATR), you might increase the standard deviation multiplier to widen the bands.

Coding the Indicator: Write the code in MQL5, ensuring to use MT5's specific functions and data structures.

input int MA_Period = 20;            // Moving Average Period
input int ATR_Period = 14;           // ATR Period
input double StdDevMultiplier = 2.0; // Standard Deviation Multiplier
double UpperBand[], LowerBand[], MiddleBand[];
double ATR_Value;

//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int OnInit()
  {
   // Set indicator buffers
   SetIndexBuffer(0, UpperBand);
   SetIndexBuffer(1, MiddleBand);
   SetIndexBuffer(2, LowerBand);

   // Other initialization tasks
   // ...

   return(INIT_SUCCEEDED);
  }
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
                const int prev_calculated,
                const datetime &time[],
                const double &open[],
                const double &high[],
                const double &low[],
                const double &close[],
                const long &tick_volume[],
                const long &volume[],
                const int &spread[])
  {
   // Calculate ATR
   ATR_Value = iATR(Symbol(), PERIOD_D1, ATR_Period, 0);

   // Loop through rates
   for(int i = 0; i < rates_total; i++)
     {
      // Calculate Middle Band (Simple Moving Average)
      MiddleBand[i] = iMA(Symbol(), PERIOD_D1, MA_Period, 0, MODE_SMA, PRICE_CLOSE, i);

      // Adjust Standard Deviation Multiplier based on ATR
      double adjustedMultiplier = AdjustMultiplier(StdDevMultiplier, ATR_Value);

      // Calculate Standard Deviation
      double stdDev = iStdDev(Symbol(), PERIOD_D1, MA_Period, 0, MODE_SMA, PRICE_CLOSE, i);

      // Calculate Upper and Lower Bands
      UpperBand[i] = MiddleBand[i] + adjustedMultiplier * stdDev;
      LowerBand[i] = MiddleBand[i] - adjustedMultiplier * stdDev;
     }

   // Rest of the calculation
   // ...

   return(rates_total);
  }

//+------------------------------------------------------------------+
//| Adjust Multiplier based on ATR                                   |
//+------------------------------------------------------------------+
double AdjustMultiplier(double baseMultiplier, double atrValue)
  {
   double adjustedMultiplier;
   // Logic to adjust the multiplier based on ATR
   // Example: Increase multiplier in high volatility, decrease in low volatility
   // ...

   return adjustedMultiplier;
  }

.
X-------------------------------------------------------X-------------------------------------------------------------X


TRIPLE EMA - TRUE OR FALSE
EMA FAST PERIOD - 10
EMA MEDIUM MULTIPLIER OF FAST - 2.0
EMA SLOW MULTIPLIER OF MEDIUM - 2.0

adaptive TRIPLE EMA - TRUE OR FALSE
adaptive EMA FAST PERIOD - 10
adaptive EMA MEDIUM MULTIPLIER OF FAST - 2.0
adaptive EMA SLOW MULTIPLIER OF MEDIUM - 2.0

adaptive ema something like this 

Here's a basic outline for creating an Adaptive EMA:

Calculate the Base EMA: Start by calculating a standard EMA with a default period.

Determine Market Volatility: Use an indicator like ATR to assess market volatility. Higher ATR values indicate higher volatility and vice versa.

Adjust the EMA Period: Modify the EMA period based on the volatility. The exact method of adjustment can vary based on your strategy.

Coding the Indicator: Write the code in MQL5, which is similar to C++.

input int EMA_BasePeriod = 14;      // Default EMA Period
input int ATR_Period = 14;          // ATR Period for volatility measurement
double AdaptiveEMA[], ATR_Value;

//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int OnInit()
  {
   // Set indicator buffers, drawing settings, etc.
   SetIndexBuffer(0, AdaptiveEMA);

   // Other initialization tasks
   // ...

   return(INIT_SUCCEEDED);
  }
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
                const int prev_calculated,
                const datetime &time[],
                const double &open[],
                const double &high[],
                const double &low[],
                const double &close[],
                const long &tick_volume[],
                const long &volume[],
                const int &spread[])
  {
   // Calculate ATR
   ATR_Value = iATR(Symbol(), PERIOD_D1, ATR_Period, 0);

   // Loop through rates
   for(int i = 0; i < rates_total; i++)
     {
      // Adjust EMA period based on ATR
      int adjusted_EMA_Period = CalculateAdjustedPeriod(EMA_BasePeriod, ATR_Value);

      // Calculate Adaptive EMA
      AdaptiveEMA[i] = iMA(Symbol(), PERIOD_D1, adjusted_EMA_Period, 0, MODE_EMA, PRICE_CLOSE, i);
     }

   // Rest of the calculation
   // ...

   return(rates_total);
  }

//+------------------------------------------------------------------+
//| Calculate adjusted EMA period based on ATR                       |
//+------------------------------------------------------------------+
int CalculateAdjustedPeriod(int basePeriod, double atrValue)
  {
   int adjustedPeriod;
   // Logic to adjust the EMA period based on ATR
   // Example: Decrease period in high volatility, increase in low volatility
   // ...

   return adjustedPeriod;
  }

FAST
MEDIUM AND 
SLOW EMA

I F I SET FAST EMA AS 10 THIS SHOULD ADJUST MEDIUM EMA AND SLOW EMA 
WHICH IS IF FAST WAS 10 THE MEDIUM SHOULD BE MULTIPLIER OF FAST WHICH IS 20 AND FOR THE SLOW WHICH IS MULTIPLIER OF MEDIUM 2X WHICH IS 40 

ADD OTHER BASIC INPUTS LIKE TP IN PIPS STOPLOSS FOR GRIDS IF SET 0 STOPLOSS FOR 1000 PIPS  AND OTHER BASIC INPUTS
I NEED A FAST AND EFFICIENT OPTIMISING CODE FOR A BETTER OPTIMISING EXPERIENCE

I need a license feature . 
X------------------------------------------------------X--------------------------------------------------------------X

STRATEGY IS 
RSI AT ITS LEVEL & BB BREAKS & FAST EMA ABOVE MEDIUM AND SLOW EMA , MEDIUM IS BELOW FAST AND ABOVE SLOW , SLOW IS BELOW BOTH THE FAST AND MEDIUM EMA 


I NEED IT TO WORK IN MULTI CURRENCY AND FOR EXAMPLE IF I CHOOSE 5 CURRENCY TO TRADE ON SAME PARAMETER , IF THE MAX ALLOWED SYMBOL IS 3 , IF ANY THREE SYMBOL TRIGGERED AND RUNNING , 
IF ANY TRADE SIGNAL TRIGGERED IN OTHER TWO IT SHOULD BE INGORNED TILL AND MINIMUM ONE OF THIS THREE RUNNING SYMBOL . 

SO IF ITS THREE SUMBOLS IN TRUE INPUT AND I CHOOSE 1 MAX SYMBOL THERE SHOULD BE AND ONE OF THE SYMBOL WILL BE RUNNING TRADE at a time
TILL THIS ONE IS CLOSE SOMWTHING LIKE ON WAKA WAKA FOR EXAMPLE .

Key Components of Your EA
.
Indicators:
.
RSI (Relative Strength Index) and Adaptive RSI: You need separate time frames for calculating standard and adaptive RSI.
Bollinger Bands and Adaptive Bollinger Bands: Separate time frames and periods for standard and adaptive Bollinger Bands.
Triple EMA (Exponential Moving Average) and adaptive ema: Fast, medium, and slow EMAs, with the medium EMA being twice the period of the fast, and the slow EMA twice the period of the medium.
 Separate time frames and periods for adaptive EMA.
.
Multi-Currency Support: The EA should be capable of handling up to 5 currency pairs simultaneously.

unique grid stoploss and start after strategy which should be applied , on this thing if you have what it is ask me , ill explain in details if you are okay with it then lets proceed . 
.
.
Trade Management:
.
Take Profit (TP) in Pips
Grid Trading System: Customizable grid size, exponential growth of the grid, and a maximum number of trades per side (up to 9).
Lot Sizing Method: A multiplier-based lot sizing for grid positions. Different multipliers for the first 5 trades, and a separate multiplier for the 6th trade onwards.
.
ATR Features: Utilize Average True Range (ATR) to calculate grid sizes, with customizable ATR periods and time frames.
.
.
Separate Time Frames: Each indicator and feature (RSI, Bollinger Bands, EMAs) should have its own customizable time frame and period settings.

LOT SIZE MANAGEMENT 

// Lot size settings
input bool useFixedLotSize = true;         // Use a fixed lot size instead of calculating based on risk
input double fixedLotSize = 0.01;          // Fixed lot size for the first trade

input double lotSizeMultiplier2 = 2.0;     // Lot size multiplier for the second trade
input double lotSizeMultiplier3to5 = 1.7;  // Lot size multiplier for trades 3rd to 5th
input double lotSizeMultiplier6onwards = 1.5;  // Lot size multiplier for trades from 6th onward
.

GRID FEATURES 

input bool useGrid = false;
input double initialGridDistance = 20.0;;
input bool useATRForGridSize = true; // Use ATR for grid size
input ENUM_TIMEFRAMES atrTimeFrame = 1; // Timeframe for ATR
input double atrMultiplierGrid = 1.0; // Multiplier for ATR to determine grid size of the initial trade
input double gridExponentialFactor = 1.5 - for atr or fixed grid size
input int gridMaxTrades = 20 - this should be customizable

grid stop loss features - 

name grid maniplation over rider level and start trading trade completed virtually

for example if i set max trades as 20 

grid maniplation over rider level - 4 the trade should close on the level 4, but again it has to start looking for new entries when the trade close automaticaly
 if i let the grid grow and run on its own tp with out closing any trade